Opcom Fw 1.95 Hex
Opcom Vaux com Win7 Win8 Win 10 Install Free download Op com diagnostic tool Vaux-com 120309a and install on Windows 7/8/10/XP, including the latest version Opcom 1.95 Vaux-com 120309a Windows 7. TL866 programmer. How to downgrade OPCOM firmware to 1.39. Circuit serial programming connection. Press Open and slect v1.39 pic 18f458 files. Then do as the pictures display. Successfully downgrade OPCOM fw 1.39 without Bootloader error! NOTE: YOU WILL TRY ON YOUR OWN RISK. CREDITS to AKI1 in the MH community.
Opcom Vaux com Win7 Win8 Win 10 Install
Free download Op com diagnostic tool Vaux-com 120309a and install on Windows 7/8/10/XP, including the latest version Opcom 1.95 Vaux-com 120309a Windows 7.
Vaux-com 120309a download free for Op com firmware 1.95/1.70/1.65/1.59/1.45:
Vaux-com 120309a works great with:
How to install Opcom diagnostic vaux-com 120309a:
vaux-com 120309a Windows XP
vaux-com 120309a Windows 7
vaux-com 120309a Windows 8
vaux-com 120309a windows 10
How to install Opcom on Windows XP:
Here is the installation instruction on OPCOM Hardware V1.59 on Windows xp.
Open “My Computer/ OP-COM (E:)” to copy all the files to a new established folder named “op-com” in “Local Disk (C:)”.
The send “OP-COM” from“Local Disk (C:)/op-com” to Desktop.
Install software for USB Serial Converter
Click on “Next” with the selection of “Install from a list of specific location (Advance)”.
Select “search removable media” and “include this location in the research”, then to “Browse” for “Desktop/My Computer/Local Disk (C:)/op-com/Drivers”. Then Click on “Next”.
Click on “Next”.
Click on “Finish” for successful installation of the software for USB Serial Converter.
Right Click on “My Computer” for “Manage”.
Select “Device Manager/PC-201103301537/Universal Serial Bus controllers/USB Srial Converter”.
Close the interface.
Open “Shortcut to CP-COM”.
Select “Settings”.
Click on “Test Interface”. And Click on “Close” on “Interface Test Result”.
Click on “Save Config” button, Click on “OK” for “Configuration saved”.
Select “Diagnostics”.
Click on “Automatic Vehicle Information”.
Click on “KWP-2000”.
Click on “Diagnose ECM”.
Click on “Back”.
Click on “Fault Codes” button.
Click on “Back”.
Click on “Close”.
Click on “Back”.
Click on “Back”.
Click on “Back”.
Click on “Back”.
Click on “Close”.
END
opcom Vaux-com 120309a widows 7 install:
Opcom 1.95 Windows 7 Install:
Step 1 Install Driver
Open opcom software CD
Copy Opcom drivers folder to desktop
Extract Opcom 2012+ DB 2014.zip folder
Copy Opcom 2012+ DB 2014 folder to desktop
Connect opcom 1.95 interface with laptop
Device driver software was not successfully installed
No driver found.
Opcon Computer-> Manager->Device Manger-> Other device-> Opcom USB V2
right click Opcom USB V2
select Update Driver Software
Select Browse my computer for driver software
save driver software to C:/Users/AADD/Desktop/Opcom drivers
Windows has successfully updated your driver software
Check now you can see USB Serial Converter
right click USB Serial Converter ->Driver tab
Driver has been successfully installed
Step 2: Run Self Test (2014V Software)
Open Opcom 2012+ DB 2014 folder on desktop
Run VAUXCOM software as administrator
Select Settings
Test interface
Frimware version V01.95
interface test ended successfully
Save configuration.
Step 3: Run 2014V VAUX-COM 120301a
Select Diagnostic functions
Select Automatic Vehicle Identification
select KWP-2000
It’s a 1997 Opel Omega-B
opcom v1.95 auto detect vehicle information i.,e VIN, model, engine code etc
select diagnose ECM
Select Fault codes functions
Check Special Functions of this model
Program immobilizer function options
Output test options
Measuring Blocks options
2014V op-com software also supports GM based SAAB and special PSG5 diesel pump
Step 4: Run optional 2012V opcom
Open Opcom 2012 zip file on software CD
Copy Opcom 2012 folder on desktop
Open Opcom 2012 folder
Run OP-COM setup as administator
Run self test and diagnostic
Done.
Opcom 1.70 Windows 7 Install:
installing opcom on windows 8:
Opcom windows 8 “driver not found”:
Can’t get it to run on windows 8, worked fine on my old w7 laptop. Tried to download software from the disc that came with the op-com then went to devise manager to op-com v2 to find drivers. Clicked on the drivers file but was told the drivers couldn’t be found
Customer solution of Vaux com windows 8:
I had the same problem when ideally I would have liked to of run Vaux-Com on my Windows 8 laptop. However since I have several machines running different OS’s anyway I didn’t bother trying the following solution.
Microsoft gave Windows 7 users a way to run older applications via ‘Windows XP Mode’. With Windows 8 that mode is no longer officially supported, and if you want to run Windows XP in a virtual machine, you need the license for it.
There is a workaround however,within the free WindowsXPMode_en-us.exe file, there’s a VirtualXPVHD file containing the Windows XP virtual machine, which you can open in VirtualBox.
Here are the steps to get this working:
- Download http://www.microsoft…ls.aspx?id=8002from Microsoft. You’ll need to run the validation tool to prove your copy of Windows is valid.
- Then use 7-Zip or another archive tool to open the EXE file as an archive.
- Within that archive, find the “sources/xpm” file within it, and extract that folder to your hard drive.
- Finally, in the extracted xpm file, you’ll find a file called VirtualXPVHD. Rename it with a VHD extension.
In VirtualBox, open the VirtualXPVHD virtual machine, and voila! You’ve got Windows XP Mode (running Windows XP Professional) in Windows 8, no need for the XP license.
This might also be possible with Windows 8’s built-in virtual machine manager, Hyper-V, but that’s only available in Windows 8 Pro.
opcom china clone windows 10:
This explains how to step by step install OPCOM VAUX-COM 120309a software driver on Windows 10, especially for those troubled with “OP-COM usb is not detected on Windows 10”.
Run VAUXCOM.exe
Allow this app to make changes to your device
Go to Settings in VAUX-COM 120309a
Test interface
Connect the interface to the USB port, or install the USB driver
Close VAUX-COM 120309a
Opcom Computer management
Launch the troubleshooter
Again, open Computer management
Uninstall USB Serial Converter
Disconnect the internet
Update driver- OP-COM USB V2
Browse my computer for driver software
Continue installing this driver
Again, run VAUXCOM.exe as administrator
Allow this app to make changes to your device
Go to Settings
Then Test interface
Firmware version tested successfully
Apply settings
Go to Diagnostics
…
Opcom Fw 1.95 Hex Pro
Successfullyinstalling opcom on windows 10!!
opcom fw 1.95 1.70 1.65 1.59 1.45 sw VAUX-COM 120309a win 10 8 7 XP download & install, PCB difference, reviews etc.
opcom VAUX-COM 120309a free download
opcom install video
opcom PCB difference
opcom Opel diagnostic tool reviews
1. opcom VAUX-COM 120309a free download
opcom VAUX-COM 120309a fw 1.95 free download
http://www.mediafire.com/file/yks663q9gk1w4rf/OP-COM_120309a.zip
Works with opcom fw 1.95:
http://www.obd2shop.co.uk/wholesale/opcom-firmware-v195-can-obd2-for-opel.html
opcom VAUX-COM 120309a fw 1.70 free download
http://www.mediafire.com/file/yks663q9gk1w4rf/OP-COM_120309a.zip
Works with opcom fw 1.70
http://www.obd2shop.co.uk/wholesale/opcom-can-obd2-for-opel-with-single-layer-pcb.html
opcom VAUX-COM 120309a fw 1.65 free download
http://www.mediafire.com/file/yks663q9gk1w4rf/OP-COM_120309a.zip
Works with
http://www.obd2shop.co.uk/wholesale/opcom-can-obd2-for-opel-with-dual-layer-pcb.html
opcom VAUX-COM 120309a fw 1.59 free download
http://www.obd2vip.com/download/op-com_120309a.zip
works withhttp://www.obd2shop.co.uk/wholesale/opcom-op-com-can-obd2-for-opel.html
opcom VAUX-COM 120309a fw 1.45 free download
http://www.obd2vip.com/download/op-com_120309a.zip
works withhttp://www.obd2shop.co.uk/wholesale/opcom-op-com-with-pic18f458-chip.html
Clone opcom English free download
http://www.obd2vip.com/download/opcom-op-com2010v.zip
Clone opcom driver in German download
http://www.obd2vip.com/download/opcom-de-090420-driver.zip
To sum up:
VAUX-COM_120309a is compatible with opcom firmware 1.95, opcom firmware V1.7, opcom 1.65, opcom 1.59 and opcom 1.45.
The functions: the same
That means all versions of opcom clone perform the same functions incl. read out and clear fault codes, read live data and perform output test. Also, print out, save, or copy the fault codes to any other application. And measure block information on many control modules & show 8 measuring block parameter simultaneously.
Workable Opel models: the same
opcom is compatible with almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
Workable control units: The same
Works on many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
2. opcom clone install
1). opccom FM v1.95 installation video
2) OPCOM V1.70 installation video
the same installation as V1.95
3) OPCOM V1.65 installation video
the same installation as V1.95
Note: All are using the same VAUX-COM 120309a software, just the hardware is different.
opcom clone OS: XP & windows7 (Try on win8 10 at your own luck)
Installing tips:
1) dotnetfx35_SP1 patch must be installed on Win 7, otherwise the software will not run properly
2) Open software as Administrator; check the installation video in CD first
Active: No need
3. opcom PCB difference
Opcom firmware V1.95 PCB:
Opcom firmware V1.7 single layer PCB:
Opcom firmware V1.65 Dual layer PCB:
Opcom fw 1.59 PCB:
Opcom fw 1.45 PCB:
Opcom Fw 1.95 Hex Gun
4. Opcom clone feedback (Quoted):
Opcom feedback 1:
Although this is a brilliant bit of kit for all Vauxhalls. BE WARNED, this wont work properly for Corsa C as you will get continuous looping (Okay for all other Vauxhalls cars though). Sellers are selling these with a 1.44 or 1.45 Firmware and saying its the latest. Yes that Firmware is the latest but the Software that comes with it has not been updated for that Firmware when its used on the Corsa C. The only way round this is to get the 1.39 Firmware (which is actually the best available) and flash the interface so that its running on 1.39 Firmware. Not for the fainthearted though as doing it wrong will damage the interface. If you have a Corsa C then look for Opcom with 1.39 Firmware. If you have any other car in the Vauxhall range then any of the Firmwares will work perfectly. Its just Firmware 1.44 or 1.45 that will not work as it should with the Corsa C.
Opcom Fw 1.95 Hexadecimal
Opcom feedback 2:
This is a great peace of kit, I own 2 vauxhalls, one a 2003 corsa c 1.2 and a 2007 combo van 1.7cdti
I bought this kit to sort out a failed instrument cluster on the wifes corsa c due to the speedo stopped working, at first it didnt connect and kept going onto loop mode but a quick search of the internet told me that the dongle needs to be running 1.39 firmware as mine was on 1.45 which wont work with corsa c and other vauxhalls, so downgraded the firmware and it now connects to all the cars modules, quickly sorted out my instrument cluster problem, a replacement was needed and I programmed it fine with opcom, this alone would of cost at a vauxhall garage, also we only had 1 key for the corsa so had a new key cut at a cobblers and I was able to programe it in with ease….again another steelership rip-off, 15 vs 350
Its amazing software and pretty much on par with the dealership tech 2 system, opcom can programme new key remotes + the key immobiliser transponders, new instrument clusters, ecus, airbags, abs and body control modules, there isnt a lot it cant do.
Recently used it to track down an EGR fault on my combo, the live data and record feature makes it easy to trace problems mine turned out to be sticking by what the figures where showing, I would of been playing parts darts with out this software as I had no fault codes, I cant praise it enough money well spent and saved at the same time….from staying away from the dealership as this is where they make thier money.
Opcom feedback 3:
The scanner worked fine on my 1997 Omega which other scanners failed to do. It showed me exactly what was wrong and I replaced the part it said and the car now works fine with no fault codes.
I would recommend it for the older Vauxhalls as well as newer ones.
However, This unit does not read the codes on the Frontera 3.2.
Apparently it is regarded as an Isuzu by Op-Com so they did not include the software for it.
Opcom feedback 4:
I have an old dell laptop running windows vista.
Popped the disk in and installed the software.
Plugged the USB in and the tool into the car and asked for drivers which were also on the disk so clicked to install and within 5 minutes was up and running reading and clearing fault codes from my 2008 Zafira 1.9 cdi (150).
I guess you would not be buying this if you were not inclined to get your hands dirty and fiddle a bit but it was a lot easier to use then I thought.
I would highly recommend. I will never have to pay a mechanic again to clear these pesky codes !!
Opcom feedback 5:
I have a vectra and I got the opcom had a bit of a problem getting the software onto my laptop but the company helped me all the way and even sent out a new disc incase that was the problem, I run windows 7 on the laptop but instead of using copy as told to do so by the instructions I used copy to folder there you can copy to the hardisc “C” and then download the drivers and it worked a treat
Opcom feedback 6:
Saved me a bucket load of cash on its first use and ell continue to save me a bucket load f cash each time my Omega puts an orange light on the dash.
Opcom feedback 7:
Delivered in 24 hrs. Did NOT like the sticky label on the CD. My CD drive instructions say “never play anything with sticky label on” so I had to remove it, which was very difficult and left a layer of sticky glue on the surface. Why didn’t you put the label on the CD sleeve? I have wiped most of the glue off now with meths, the laptop CD drive reads it but not the desktop pc, but my desktop drive may be faulty.
Having said that everything worked and NJ Diagnostics very kindly offered me a replacement CD anyway.
It took about 40 mins to transfer CD on to my laptop, maybe because of the glue. I didn’t install straight from the CD but copied from CD to laptop desktop ( I mean the desktop of the laptop, after all these years I have just realised the ambiguity). Then I ran the .exe file from the desktop.
There are 5 file/folders plus the read me file.
the .exe file
the drivers folder
the huge video guide
a folder with specific manuals in .pdf, (may be needed)
A small video with install instructions. USE IT!.
First disable your antivirus and firewall.
Copy 5 folders to pc desktop.
The video guides folder is huge, over half a Gb and very blurry. You can do without it, if you can get as far as running the software and talking to the interface then you are clever enough go ahead without this guide.
But DO watch the small video. Go carefully. The drivers file is used by the program during installation but when you load the drivers yourself you will load them from “program files” as explained.
Double click the .exe and follow the short video.
A small cheesy installation window opens up where you choose 32 or 64 bit and your language.
When you get to the end of the installation and have lights on the black interface and have done the software test, close the program, leave “Windows” on, take your laptop with the attached interface to your car, plug in the interface to the socket in the car, (under the flap under the handbrake in my Astra), turn on the ignition, probably no need to start the engine, run the program, select your vehicle the same as you did when you followed the short video, double click on each item for year and model, select the engine type, and the program should now spring in to action and recognise your car.
If you are working on airbags, remember that they are not in the Engine section, you don’t need that at all, they are in the “Body” section.
Note the fault codes and clear them. The airbag light doesn’t go out immediately, but I looked after a few seconds and it had gone out. I don’t know what I did at the time, maybe there is just the delay, or maybe it was because I closed a window. I thought I might have to turn everything off and turn on thre ignition again but I didn’t, the light went our while everything was still on.
I am so pleased!
To be continued…
